Contents

• List of Figures
• 1. Introduction
  • 1.1 Terms and Abbreviations
  • 1.2 Related Documents
  • 1.3 Overview
  • 1.4 Key Features & Benefits
  • 1.5 The USBTester Stack
  
  
• 2. Installing USBTester
  • 2.1 System Requirements
    • 2.1.1 Hardware Requirements
    • 2.1.2 Software Requirements
  • 2.2 Preliminary Information
  • 2.3 Installation Procedure
  
  
• 3. Using USBTester
  • 3.1 Selecting a USB Host Controller Card
  • 3.2 Selecting the Tests to Execute
  • 3.3 Selecting the Test Device
  • 3.4 Executing Tests
  • 3.5 Understanding the Tests Results
  
  
• 4. USBTester Command-Line Execution
  • 4.1 USBTester Command-Line Options
  • 4.2 USBTester Command-Line Commands
  
  
• 5. Enhanced Features
  • 5.1 USB Bus Analyzers Integration
    • 5.1.1 Ellisys's USB Explorer 200 USB 2.0 Protocol Analyzer
    • 5.1.2 Ellisys's USB Tracker 110 USB 1.1 Protocol Analyzer
    • 5.1.3 LeCroy's USBMobile Hi-Speed Bus and Protocol Analyzer
    • 5.1.4 Total Phase's Beagle USB 480 Analyzer
  
  
• 6. System Recovery
• A. Tests Reference
  • A.1 Test Documentation Structure
  • A.2 General Information
    • A.2.1 Device States
    • A.2.2 Device Enumeration
    • A.2.3 Testing Multi-Configuration and Multi-Interface Devices
  • A.3 Chapter 9 Tests - USB Device Framework
    • A.3.1 T.1.1: Device Descriptor
    • A.3.2 T.1.2: Device Qualifier Descriptor
    • A.3.3 T.1.3: Configuration Descriptor
    • A.3.4 T.1.4: Interface Descriptor
    • A.3.5 T.1.5: Endpoint Descriptor
    • A.3.6 T.1.6: Halt Endpoint
    • A.3.7 T.1.8: Bad Descriptor
    • A.3.8 T.1.11: Set Configuration
    • A.3.9 T.1.12: Device Enumeration
    • A.3.10 T.1.13: Suspend/Resume
    • A.3.11 Utility Tests
      • A.3.11.1 T.1.7: String Descriptor
  • A.4 Mass Storage Tests
    • A.4.1 T.2.1: Mass Storage Interface Descriptor
    • A.4.2 T.2.2: Mass Storage Serial Number
    • A.4.3 T.2.3: bCBWCBLength
    • A.4.4 MSC BOT Thirteen Cases Tests
      • A.4.4.1 Preliminary Procedure
      • A.4.4.2 Recovery Procedure
      • A.4.4.3 T.2.4: BOT Case 1
      • A.4.4.4 T.2.5: BOT Case 2
      • A.4.4.5 T.2.6: BOT Case 3
      • A.4.4.6 T.2.7: BOT Case 4
      • A.4.4.7 T.2.8: BOT Case 5
      • A.4.4.8 T.2.9: BOT Case 6
      • A.4.4.9 T.2.10: BOT Case 7
      • A.4.4.10 T.2.11: BOT Case 8
      • A.4.4.11 T.2.12: BOT Case 9
      • A.4.4.12 T.2.13: BOT Case 10
      • A.4.4.13 T.2.14: BOT Case 11
      • A.4.4.14 T.2.15: BOT Case 12
      • A.4.4.15 T.2.16: BOT Case 13
  • A.5 Extended Mass Storage Tests
    • A.5.1 Large Buffer Data Transfer Tests
      • A.5.1.1 T.3.1: Mass Storage Large Buffer Read Transfer
      • A.5.1.2 T.3.2: Mass Storage Large Buffer Write Transfer
    • A.5.2 Out of Bound Data Transfer Tests
      • A.5.2.1 T.3.3: Mass Storage Illegal Offset Read Transfer
      • A.5.2.2 T.3.4: Mass Storage Illegal Offset Write Transfer
      • A.5.2.3 T.3.5: Mass Storage Data Overflow Read Transfer
      • A.5.2.4 T.3.6: Mass Storage Data Overflow Write Transfer
    • A.5.3 Performance Tests
      • A.5.3.1 T.3.7: Mass Storage Read Transfer Performance
      • A.5.3.2 T.3.8: Mass Storage Write Transfer Performance
  • A.6 Human Interface Device Tests
    • A.6.1 HID Interfaces Identification
    • A.6.2 T.4.1: HID Descriptors
    • A.6.3 T.4.2: HID Get/Set Idle
    • A.6.4 T.4.3: HID Get/Set Protocol
  • A.7 CDC ACM Tests
    • A.7.1 T.5.1: Descriptors
    • A.7.2 CDC ACM Requests
      • A.7.2.1 T.5.2: Encapsulated Command
      • A.7.2.2 T.5.3: Set/Get Comm Feature
      • A.7.2.3 T.5.4: Clear Comm Feature
      • A.7.2.4 T.5.5: Set/Get Line Coding
      • A.7.2.5 T.5.6: Set Control Line State
      • A.7.2.6 T.5.7: Send Break
    • A.7.3 T.5.8: AT Commands
  • A.8 Test Suites
    • A.8.1 Chapter 9 Test Suite
    • A.8.2 Mass Storage Test Suite
    • A.8.3 Mass Storage Performance Test Suite
    • A.8.4 Extended Mass Storage Test Suite
    • A.8.5 HID Test Suite
    • A.8.6 CDC ACM Test Suite
  
  
• B. Known Issues and Limitations
  • B.1 Known Issues
  • B.2 Limitations
  
  
• C. USBTester Editions
• D. Ordering USBTester