-
Linux
-
Mac OS X
-
Solaris
-
VxWorks
-
Windows
-
Windows 2000
-
Windows 7
-
Windows 95
-
Windows 98/ME
-
Windows NT 4.0
-
Windows Server 2003
-
Windows Server 2008
-
Windows Vista
-
Windows XP
-
Windows CE / Windows Mobile 5.0
-
Operating System — All
Linux
19 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 8 | When trying to install WinDriver v5.2.0 on my PC, using the Linux RedHat 7.2 distribution, I got "unresolved symbol" errors pertaining to alloc_kiovec and free_kiovec. How can I resolve these errors? | WinDriver | 5.2.X |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 12 | What is the wddebug_gui Debug Monitor utility and how can I use it? | WinDriver | — |
| 13 | What is the wddebug Debug Monitor utility and how can I use it? | WinDriver | — |
| 22 | Does WinDriver support the Real Time Linux operating system? | WinDriver | — |
| 25 | I am trying to install WinDriver v5.0.5 on a machine running Linux SuSE 8.0, which uses the 2.4.18-4 Linux kernel. But the 'make install' command fails with this error: unresolved symbol kmap_pagetable |
WinDriver | 5.2.0 and below |
| 43 | Developing 32-bit Applications for 64-bit Architectures | WinDriver | 9.2.1 and above |
| 44 | Sending debug information from WinDriver's kernel module to a kernel debugger | WinDriver | 5.0.4 and above |
| 47 | Does WinDriver support Scatter/Gather DMA on Linux? | WinDriver | 5.2.0 and above |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 61 | I am trying to install WinDriver on my Linux machine, but when I insert the WinDriver module (windrvr6.o) into the kernel I get errors regarding kernel version mismatch or unresolved symbols. How can I resolve this? | WinDriver | — |
| 62 | Kernel PlugIn Driver Installation — General Guidelines | WinDriver | — |
| 63 | When compiling the WinDriver module on Linux machine, I get the following error: usr/include/linux/modversions.h:1:2: #error Modules should never use kernel-headers system headers, but headers from an appropriate kernel-source |
WinDriver | 6.2.2 and below |
| 64 | Linux Contiguous Buffer DMA allocations — 128KB limitation | WinDriver | 8.0.1 and below |
| 78 | Using WinDriver on Linux, I find that I need to reload the driver module (windrvr6.o) after each reboot. How can I set up dynamic loading of windrvr6.o? | WinDriver | — |
| 93 | I get the following error when trying to install WinDriver on a Linux machine with kernel version 2.4.18-4 from the RedHat 7.3 distribution. How can I resolve this? linux_wrappers.c:405: too few arguments to function 'do_munmap_Rd007fc14' make:*** [LINUX.2.4.18-3/linux_wrappers.o] |
WinDriver | 5.2.1 and below |
| 110 | When installing WinDriver v5.0.5 on my Linux machine, I get the following warning: Warning:loading /lib/modules/misc/windriver.o will taint the kernel: no license |
WinDriver | 5.0.5 and below |
| 125 | Handling shared PCI interrupts in the Kernel PlugIn | WinDriver | — |
Back to Top
Solaris
9 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 13 | What is the wddebug Debug Monitor utility and how can I use it? | WinDriver | — |
| 44 | Sending debug information from WinDriver's kernel module to a kernel debugger | WinDriver | 5.0.4 and above |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 62 | Kernel PlugIn Driver Installation — General Guidelines | WinDriver | — |
| 65 | WinDriver For Solaris — 32-bit Architecture Support | WinDriver | 9.0.1 and below |
| 66 | WinDriver for Solaris SPARC — 33Mhz * 33MB PCI Bus Support | WinDriver | 9.0.1 and below |
| 125 | Handling shared PCI interrupts in the Kernel PlugIn | WinDriver | — |
Back to Top
VxWorks
12 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 14 | How do I use the Debug Monitor utility on VxWorks? | DriverBuilder | 5.4 and below |
| 17 | How can I improve my driver's performance with WinDriver? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 67 | Can I use DriverBuilder to develop an Ethernet network driver for VxWorks? | DriverBuilder | 5.4 and below |
| 68 | I am trying to use DriveBuilder for VxWorks, but I fail downloading windrvr.o to the target. I get a message that the following symbols were unresolved: pciConfigInlong, pciConfigOutLong. | DriverBuilder | 5.4 and below |
| 69 | I am using DriverBuilder for VxWorks. I loaded pci_diag.out and ran pci_diag_main, but if failed with the following error message: Error loading driver | DriverBuilder | 5.4 and below |
| 70 | What are the names of the entry points routines for your various sample programs: wddebug.out, pci_dump.out, etc.? | DriverBuilder | 5.4 and below |
| 71 | When running the PCI diagnostics application on a VxWorks machine, I get the following error message when trying to open the board: "Card does not have all items expected for MyDriver". | DriverBuilder | 5.4 and below |
| 72 | I run pci_dump.out on a VxWorks machine and it shows my card having all zeros in the BARs. But when I plug the card into a Windows PC, the BARs have values. | DriverBuilder | — |
| 115 | How can I improve the rate of the interrupt handling when using DriverBuilder for VxWorks? | WinDriver | 5.2.2 – 5.4 |
Back to Top
Windows CE / Windows Mobile 5.0
8 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 11 | Can WinDriver be used to develop for the Windows CE.NET (v4.1) operating system? | WinDriver | — |
| 13 | What is the wddebug Debug Monitor utility and how can I use it? | WinDriver | — |
| 44 | Sending debug information from WinDriver's kernel module to a kernel debugger | WinDriver | 5.0.4 and above |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 60 | Can WinDriver be used in order to develop a network driver for Windows CE? | WinDriver | — |
| 91 | Does WinDriver USB support isochronous streaming mode? | WinDriver | 9.0.0 and above |
Back to Top
Windows 2000
50 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 8 | When trying to install WinDriver v5.2.0 on my PC, using the Linux RedHat 7.2 distribution, I got "unresolved symbol" errors pertaining to alloc_kiovec and free_kiovec. How can I resolve these errors? | WinDriver | 5.2.X |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 11 | Can WinDriver be used to develop for the Windows CE.NET (v4.1) operating system? | WinDriver | — |
| 12 | What is the wddebug_gui Debug Monitor utility and how can I use it? | WinDriver | — |
| 13 | What is the wddebug Debug Monitor utility and how can I use it? | WinDriver | — |
| 14 | How do I use the Debug Monitor utility on VxWorks? | DriverBuilder | 5.4 and below |
| 17 | How can I improve my driver's performance with WinDriver? | WinDriver | — |
| 22 | Does WinDriver support the Real Time Linux operating system? | WinDriver | — |
| 25 | I am trying to install WinDriver v5.0.5 on a machine running Linux SuSE 8.0, which uses the 2.4.18-4 Linux kernel. But the 'make install' command fails with this error: unresolved symbol kmap_pagetable |
WinDriver | 5.2.0 and below |
| 27 | How do I detect the location of my USB device on my Windows 2000 PC? | WinDriver | 6.2.0 and above |
| 43 | Developing 32-bit Applications for 64-bit Architectures | WinDriver | 9.2.1 and above |
| 44 | Sending debug information from WinDriver's kernel module to a kernel debugger | WinDriver | 5.0.4 and above |
| 47 | Does WinDriver support Scatter/Gather DMA on Linux? | WinDriver | 5.2.0 and above |
| 49 | I have problems replacing the driver for my PCI/USB devices on Windows 2000: I have created and installed INF files for my Plug-and-Play devices using v5.2.2 of WinDriver. After upgrading to v6.0.3 of WinDriver I created new INF files for my devices and attempted to install them using wdreg.exe, but Windows 2000 still installed the old INF files from v5.2.2. How can I resolve this? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 54 | Sample InstallShield procedure for installing the driver on a Windows machine | WinDriver | 5.2.2 and below |
| 57 | Driver installation on Plug-and-Play systems (Windows 98/Me/2000/XP) — version 5.0.5 and earlier | WinDriver | 5.0.5 and below |
| 58 | My call to WD_DMALock() fails to allocate a 1GB DMA buffer on Windows 2000. Is this a limitation of the operating system? | WinDriver | — |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 60 | Can WinDriver be used in order to develop a network driver for Windows CE? | WinDriver | — |
| 61 | I am trying to install WinDriver on my Linux machine, but when I insert the WinDriver module (windrvr6.o) into the kernel I get errors regarding kernel version mismatch or unresolved symbols. How can I resolve this? | WinDriver | — |
| 62 | Kernel PlugIn Driver Installation — General Guidelines | WinDriver | — |
| 63 | When compiling the WinDriver module on Linux machine, I get the following error: usr/include/linux/modversions.h:1:2: #error Modules should never use kernel-headers system headers, but headers from an appropriate kernel-source |
WinDriver | 6.2.2 and below |
| 64 | Linux Contiguous Buffer DMA allocations — 128KB limitation | WinDriver | 8.0.1 and below |
| 65 | WinDriver For Solaris — 32-bit Architecture Support | WinDriver | 9.0.1 and below |
| 66 | WinDriver for Solaris SPARC — 33Mhz * 33MB PCI Bus Support | WinDriver | 9.0.1 and below |
| 67 | Can I use DriverBuilder to develop an Ethernet network driver for VxWorks? | DriverBuilder | 5.4 and below |
| 68 | I am trying to use DriveBuilder for VxWorks, but I fail downloading windrvr.o to the target. I get a message that the following symbols were unresolved: pciConfigInlong, pciConfigOutLong. | DriverBuilder | 5.4 and below |
| 69 | I am using DriverBuilder for VxWorks. I loaded pci_diag.out and ran pci_diag_main, but if failed with the following error message: Error loading driver | DriverBuilder | 5.4 and below |
| 70 | What are the names of the entry points routines for your various sample programs: wddebug.out, pci_dump.out, etc.? | DriverBuilder | 5.4 and below |
| 71 | When running the PCI diagnostics application on a VxWorks machine, I get the following error message when trying to open the board: "Card does not have all items expected for MyDriver". | DriverBuilder | 5.4 and below |
| 72 | I run pci_dump.out on a VxWorks machine and it shows my card having all zeros in the BARs. But when I plug the card into a Windows PC, the BARs have values. | DriverBuilder | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 78 | Using WinDriver on Linux, I find that I need to reload the driver module (windrvr6.o) after each reboot. How can I set up dynamic loading of windrvr6.o? | WinDriver | — |
| 89 | WinDriver driver distribution to a target Windows machine — versions 4.2.0 – 5.0.5b | WinDriver | 4.2.0 – 5.0.5b |
| 90 | Installing an INF file for PCI/USB devices on Windows Plug and Play systems — versions 4.20 – 5.05 of WinDriver. | WinDriver | 4.2.0 – 5.0.5 |
| 91 | Does WinDriver USB support isochronous streaming mode? | WinDriver | 9.0.0 and above |
| 92 | I used the DriverWizard to listen to the floppy disk interrupt (IRQ 6) successfully on my Windows 2000 machine. But when I try to listen to the mouse interrupt (IRQ 12) or to the keyboard interrupt (IRQ 1), I get the following error message: Cannot enable interrupt — might be in use by another device |
WinDriver | — |
| 93 | I get the following error when trying to install WinDriver on a Linux machine with kernel version 2.4.18-4 from the RedHat 7.3 distribution. How can I resolve this? linux_wrappers.c:405: too few arguments to function 'do_munmap_Rd007fc14' make:*** [LINUX.2.4.18-3/linux_wrappers.o] |
WinDriver | 5.2.1 and below |
| 108 | Using WinDriver with Windows 2000 Service Pack 3 | WinDriver | 5.0.5 and below |
| 110 | When installing WinDriver v5.0.5 on my Linux machine, I get the following warning: Warning:loading /lib/modules/misc/windriver.o will taint the kernel: no license |
WinDriver | 5.0.5 and below |
| 111 | Distributing your WinDriver v5.2.x based driver to a target Windows machine | WinDriver | 5.2.X |
| 113 | Distributing your KernelDriver based driver to a target Windows machine (versions 5.2.x – 6.1.x) | KernelDriver | 5.2.2 – 6.1.x |
| 115 | How can I improve the rate of the interrupt handling when using DriverBuilder for VxWorks? | WinDriver | 5.2.2 – 5.4 |
| 117 | Distributing your WinDriver-based driver to a target Windows PC — versions 6.x – 7.x | WinDriver | 6.x – 7.x |
| 125 | Handling shared PCI interrupts in the Kernel PlugIn | WinDriver | — |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 130 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.0.x | WinDriver | 8.0.x |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Windows 95
7 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 54 | Sample InstallShield procedure for installing the driver on a Windows machine | WinDriver | 5.2.2 and below |
| 89 | WinDriver driver distribution to a target Windows machine — versions 4.2.0 – 5.0.5b | WinDriver | 4.2.0 – 5.0.5b |
| 111 | Distributing your WinDriver v5.2.x based driver to a target Windows machine | WinDriver | 5.2.X |
| 113 | Distributing your KernelDriver based driver to a target Windows machine (versions 5.2.x – 6.1.x) | KernelDriver | 5.2.2 – 6.1.x |
| 117 | Distributing your WinDriver-based driver to a target Windows PC — versions 6.x – 7.x | WinDriver | 6.x – 7.x |
Back to Top
Windows 98/ME
12 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 54 | Sample InstallShield procedure for installing the driver on a Windows machine | WinDriver | 5.2.2 and below |
| 57 | Driver installation on Plug-and-Play systems (Windows 98/Me/2000/XP) — version 5.0.5 and earlier | WinDriver | 5.0.5 and below |
| 89 | WinDriver driver distribution to a target Windows machine — versions 4.2.0 – 5.0.5b | WinDriver | 4.2.0 – 5.0.5b |
| 90 | Installing an INF file for PCI/USB devices on Windows Plug and Play systems — versions 4.20 – 5.05 of WinDriver. | WinDriver | 4.2.0 – 5.0.5 |
| 109 | I created a USB driver with WinDriver v5.0.5. The driver works well on
Windows 98 using windrvr.sys, but when I try to use
windrvr.vxd, WinDriver's API no longer works, and I
see the following message in the Debug Monitor: USB is not implemented on this OS |
WinDriver | 6.0.3 and below |
| 111 | Distributing your WinDriver v5.2.x based driver to a target Windows machine | WinDriver | 5.2.X |
| 113 | Distributing your KernelDriver based driver to a target Windows machine (versions 5.2.x – 6.1.x) | KernelDriver | 5.2.2 – 6.1.x |
| 117 | Distributing your WinDriver-based driver to a target Windows PC — versions 6.x – 7.x | WinDriver | 6.x – 7.x |
| 120 | I have trouble compiling/building a Kernel PlugIn *.sys driver on a Windows 98/Me PC | WinDriver | 5.2.0 – 9.2.0 |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Windows NT 4.0
13 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 7 | WinDriver for Windows NT 4.0 — supported service pack | WinDriver | 8.0.2 and below |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 54 | Sample InstallShield procedure for installing the driver on a Windows machine | WinDriver | 5.2.2 and below |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 89 | WinDriver driver distribution to a target Windows machine — versions 4.2.0 – 5.0.5b | WinDriver | 4.2.0 – 5.0.5b |
| 111 | Distributing your WinDriver v5.2.x based driver to a target Windows machine | WinDriver | 5.2.X |
| 112 | WinDriver USB for Windows NT 4.0 (version 5.1.x) — Distributing Your Driver | WinDriver | 5.1.X |
| 113 | Distributing your KernelDriver based driver to a target Windows machine (versions 5.2.x – 6.1.x) | KernelDriver | 5.2.2 – 6.1.x |
| 114 | KernelDriver USB for Windows NT 4.0 (version 5.1.x) — Distributing Your Driver | KernelDriver | 5.1.X |
| 117 | Distributing your WinDriver-based driver to a target Windows PC — versions 6.x – 7.x | WinDriver | 6.x – 7.x |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 130 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.0.x | WinDriver | 8.0.x |
Back to Top
Windows XP
16 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 54 | Sample InstallShield procedure for installing the driver on a Windows machine | WinDriver | 5.2.2 and below |
| 56 | Windows XP crashes (BSOD) when I listen to an isochronous pipe on my USB device. | WinDriver | — |
| 57 | Driver installation on Plug-and-Play systems (Windows 98/Me/2000/XP) — version 5.0.5 and earlier | WinDriver | 5.0.5 and below |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 89 | WinDriver driver distribution to a target Windows machine — versions 4.2.0 – 5.0.5b | WinDriver | 4.2.0 – 5.0.5b |
| 90 | Installing an INF file for PCI/USB devices on Windows Plug and Play systems — versions 4.20 – 5.05 of WinDriver. | WinDriver | 4.2.0 – 5.0.5 |
| 111 | Distributing your WinDriver v5.2.x based driver to a target Windows machine | WinDriver | 5.2.X |
| 113 | Distributing your KernelDriver based driver to a target Windows machine (versions 5.2.x – 6.1.x) | KernelDriver | 5.2.2 – 6.1.x |
| 117 | Distributing your WinDriver-based driver to a target Windows PC — versions 6.x – 7.x | WinDriver | 6.x – 7.x |
| 123 | Parallel ports on Windows XP | WinDriver | — |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 130 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.0.x | WinDriver | 8.0.x |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Windows Vista
6 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Windows Server 2003
7 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 130 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.0.x | WinDriver | 8.0.x |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Windows Server 2008
7 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 130 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.0.x | WinDriver | 8.0.x |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Windows 7
6 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Windows
51 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 5 | Using WinDriver to develop in Visual Basic | WinDriver | — |
| 6 | Using WinDriver to develop a graphical Win32 or MFC application | WinDriver | — |
| 7 | WinDriver for Windows NT 4.0 — supported service pack | WinDriver | 8.0.2 and below |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 10 | Does WinDriver support development in C#? | WinDriver | 7.0.0 and above |
| 11 | Can WinDriver be used to develop for the Windows CE.NET (v4.1) operating system? | WinDriver | — |
| 12 | What is the wddebug_gui Debug Monitor utility and how can I use it? | WinDriver | — |
| 13 | What is the wddebug Debug Monitor utility and how can I use it? | WinDriver | — |
| 26 | Can I use WinDriver to define additional serial/parallel ports, using a PLX card? | WinDriver | 6.2.3 and below |
| 27 | How do I detect the location of my USB device on my Windows 2000 PC? | WinDriver | 6.2.0 and above |
| 43 | Developing 32-bit Applications for 64-bit Architectures | WinDriver | 9.2.1 and above |
| 44 | Sending debug information from WinDriver's kernel module to a kernel debugger | WinDriver | 5.0.4 and above |
| 49 | I have problems replacing the driver for my PCI/USB devices on Windows 2000: I have created and installed INF files for my Plug-and-Play devices using v5.2.2 of WinDriver. After upgrading to v6.0.3 of WinDriver I created new INF files for my devices and attempted to install them using wdreg.exe, but Windows 2000 still installed the old INF files from v5.2.2. How can I resolve this? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 51 | How do I port a DOS driver, which uses inp() and outp() calls to access the card, into a Windows driver? | WinDriver | — |
| 54 | Sample InstallShield procedure for installing the driver on a Windows machine | WinDriver | 5.2.2 and below |
| 56 | Windows XP crashes (BSOD) when I listen to an isochronous pipe on my USB device. | WinDriver | — |
| 57 | Driver installation on Plug-and-Play systems (Windows 98/Me/2000/XP) — version 5.0.5 and earlier | WinDriver | 5.0.5 and below |
| 58 | My call to WD_DMALock() fails to allocate a 1GB DMA buffer on Windows 2000. Is this a limitation of the operating system? | WinDriver | — |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 60 | Can WinDriver be used in order to develop a network driver for Windows CE? | WinDriver | — |
| 62 | Kernel PlugIn Driver Installation — General Guidelines | WinDriver | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 86 | How do I detect that a USB device has been plugged in or disconnected? | WinDriver | — |
| 89 | WinDriver driver distribution to a target Windows machine — versions 4.2.0 – 5.0.5b | WinDriver | 4.2.0 – 5.0.5b |
| 90 | Installing an INF file for PCI/USB devices on Windows Plug and Play systems — versions 4.20 – 5.05 of WinDriver. | WinDriver | 4.2.0 – 5.0.5 |
| 91 | Does WinDriver USB support isochronous streaming mode? | WinDriver | 9.0.0 and above |
| 92 | I used the DriverWizard to listen to the floppy disk interrupt (IRQ 6) successfully on my Windows 2000 machine. But when I try to listen to the mouse interrupt (IRQ 12) or to the keyboard interrupt (IRQ 1), I get the following error message: Cannot enable interrupt — might be in use by another device |
WinDriver | — |
| 95 | Does WinDriver support development for PCMCIA devices? | WinDriver | 6.2.2 and above |
| 97 | Can WinDriver share the Parallel/Serial port with Windows' drivers? | WinDriver | — |
| 99 | Programming the Serial Port — a brief introduction | WinDriver | — |
| 103 | Can I write to disk files during an interrupt routine? | WinDriver | — |
| 107 | When performing data transfers with WD_UsbTransfer(), what is the significance of the USB_SHORT_TRANSFER and USB_FULL_TRANSFER flags (versions 5.0.4 – 5.2.2)? | WinDriver | 5.0.4 – 5.2.2 |
| 108 | Using WinDriver with Windows 2000 Service Pack 3 | WinDriver | 5.0.5 and below |
| 109 | I created a USB driver with WinDriver v5.0.5. The driver works well on
Windows 98 using windrvr.sys, but when I try to use
windrvr.vxd, WinDriver's API no longer works, and I
see the following message in the Debug Monitor: USB is not implemented on this OS |
WinDriver | 6.0.3 and below |
| 111 | Distributing your WinDriver v5.2.x based driver to a target Windows machine | WinDriver | 5.2.X |
| 112 | WinDriver USB for Windows NT 4.0 (version 5.1.x) — Distributing Your Driver | WinDriver | 5.1.X |
| 113 | Distributing your KernelDriver based driver to a target Windows machine (versions 5.2.x – 6.1.x) | KernelDriver | 5.2.2 – 6.1.x |
| 114 | KernelDriver USB for Windows NT 4.0 (version 5.1.x) — Distributing Your Driver | KernelDriver | 5.1.X |
| 117 | Distributing your WinDriver-based driver to a target Windows PC — versions 6.x – 7.x | WinDriver | 6.x – 7.x |
| 119 | I used the DriverWizard from version 6.0.0 of WinDriver to generate Visual Basic code for my USB device, but while WDU_Transfer() works correctly, the specific transfer functions — WDU_TransferBulk(), etc. — are not working as expected. | WinDriver | 6.0.0 |
| 120 | I have trouble compiling/building a Kernel PlugIn *.sys driver on a Windows 98/Me PC | WinDriver | 5.2.0 – 9.2.0 |
| 121 | What should I do in case of Windows system crash (on Windows 2000 and above)? | WinDriver | — |
| 123 | Parallel ports on Windows XP | WinDriver | — |
| 124 | When trying to intsall WinDriver on my Windows PC I got the following error: 16-bit MS-DOS Subsystem path to the program that you are trying to start or install C:\Winnt\System32\autoexec.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. |
WinDriver | 6.2.3 and below |
| 125 | Handling shared PCI interrupts in the Kernel PlugIn | WinDriver | — |
| 128 | Does WinDriver support development of drivers for the .NET framework? | WinDriver | 7.0.1 and above |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 130 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.0.x | WinDriver | 8.0.x |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Mac OS X
5 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 12 | What is the wddebug_gui Debug Monitor utility and how can I use it? | WinDriver | — |
| 13 | What is the wddebug Debug Monitor utility and how can I use it? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
Back to Top
All Operating System
81 Technical Documents| ID | Subject | Product | Version |
| 4 | What operating systems and their respective versions does WinDriver support? | WinDriver | — |
| 5 | Using WinDriver to develop in Visual Basic | WinDriver | — |
| 6 | Using WinDriver to develop a graphical Win32 or MFC application | WinDriver | — |
| 7 | WinDriver for Windows NT 4.0 — supported service pack | WinDriver | 8.0.2 and below |
| 8 | When trying to install WinDriver v5.2.0 on my PC, using the Linux RedHat 7.2 distribution, I got "unresolved symbol" errors pertaining to alloc_kiovec and free_kiovec. How can I resolve these errors? | WinDriver | 5.2.X |
| 9 | What are the limitations of the WinDriver evaluation kits? | WinDriver | — |
| 10 | Does WinDriver support development in C#? | WinDriver | 7.0.0 and above |
| 11 | Can WinDriver be used to develop for the Windows CE.NET (v4.1) operating system? | WinDriver | — |
| 12 | What is the wddebug_gui Debug Monitor utility and how can I use it? | WinDriver | — |
| 13 | What is the wddebug Debug Monitor utility and how can I use it? | WinDriver | — |
| 14 | How do I use the Debug Monitor utility on VxWorks? | DriverBuilder | 5.4 and below |
| 17 | How can I improve my driver's performance with WinDriver? | WinDriver | — |
| 22 | Does WinDriver support the Real Time Linux operating system? | WinDriver | — |
| 25 | I am trying to install WinDriver v5.0.5 on a machine running Linux SuSE 8.0, which uses the 2.4.18-4 Linux kernel. But the 'make install' command fails with this error: unresolved symbol kmap_pagetable |
WinDriver | 5.2.0 and below |
| 26 | Can I use WinDriver to define additional serial/parallel ports, using a PLX card? | WinDriver | 6.2.3 and below |
| 27 | How do I detect the location of my USB device on my Windows 2000 PC? | WinDriver | 6.2.0 and above |
| 29 | Is the Kernel PlugIn available for all operating systems? | WinDriver | — |
| 43 | Developing 32-bit Applications for 64-bit Architectures | WinDriver | 9.2.1 and above |
| 44 | Sending debug information from WinDriver's kernel module to a kernel debugger | WinDriver | 5.0.4 and above |
| 45 | What are the COPY_TO_USER_OR_KERNEL and COPY_FROM_USER_OR_KERNEL macros and when should they be used? | WinDriver | — |
| 47 | Does WinDriver support Scatter/Gather DMA on Linux? | WinDriver | 5.2.0 and above |
| 49 | I have problems replacing the driver for my PCI/USB devices on Windows 2000: I have created and installed INF files for my Plug-and-Play devices using v5.2.2 of WinDriver. After upgrading to v6.0.3 of WinDriver I created new INF files for my devices and attempted to install them using wdreg.exe, but Windows 2000 still installed the old INF files from v5.2.2. How can I resolve this? | WinDriver | — |
| 50 | WinDriver Operating Systems Support — Versions Overview | WinDriver | — |
| 51 | How do I port a DOS driver, which uses inp() and outp() calls to access the card, into a Windows driver? | WinDriver | — |
| 54 | Sample InstallShield procedure for installing the driver on a Windows machine | WinDriver | 5.2.2 and below |
| 56 | Windows XP crashes (BSOD) when I listen to an isochronous pipe on my USB device. | WinDriver | — |
| 57 | Driver installation on Plug-and-Play systems (Windows 98/Me/2000/XP) — version 5.0.5 and earlier | WinDriver | 5.0.5 and below |
| 58 | My call to WD_DMALock() fails to allocate a 1GB DMA buffer on Windows 2000. Is this a limitation of the operating system? | WinDriver | — |
| 59 | I have run into a problem accessing 32MB of memory on a PCI card. WD_CardRegister() fails to map the memory. The problem does not occur if I try to access 16MB of memory on my card. |
WinDriver | — |
| 60 | Can WinDriver be used in order to develop a network driver for Windows CE? | WinDriver | — |
| 61 | I am trying to install WinDriver on my Linux machine, but when I insert the WinDriver module (windrvr6.o) into the kernel I get errors regarding kernel version mismatch or unresolved symbols. How can I resolve this? | WinDriver | — |
| 62 | Kernel PlugIn Driver Installation — General Guidelines | WinDriver | — |
| 63 | When compiling the WinDriver module on Linux machine, I get the following error: usr/include/linux/modversions.h:1:2: #error Modules should never use kernel-headers system headers, but headers from an appropriate kernel-source |
WinDriver | 6.2.2 and below |
| 64 | Linux Contiguous Buffer DMA allocations — 128KB limitation | WinDriver | 8.0.1 and below |
| 65 | WinDriver For Solaris — 32-bit Architecture Support | WinDriver | 9.0.1 and below |
| 66 | WinDriver for Solaris SPARC — 33Mhz * 33MB PCI Bus Support | WinDriver | 9.0.1 and below |
| 67 | Can I use DriverBuilder to develop an Ethernet network driver for VxWorks? | DriverBuilder | 5.4 and below |
| 68 | I am trying to use DriveBuilder for VxWorks, but I fail downloading windrvr.o to the target. I get a message that the following symbols were unresolved: pciConfigInlong, pciConfigOutLong. | DriverBuilder | 5.4 and below |
| 69 | I am using DriverBuilder for VxWorks. I loaded pci_diag.out and ran pci_diag_main, but if failed with the following error message: Error loading driver | DriverBuilder | 5.4 and below |
| 70 | What are the names of the entry points routines for your various sample programs: wddebug.out, pci_dump.out, etc.? | DriverBuilder | 5.4 and below |
| 71 | When running the PCI diagnostics application on a VxWorks machine, I get the following error message when trying to open the board: "Card does not have all items expected for MyDriver". | DriverBuilder | 5.4 and below |
| 72 | I run pci_dump.out on a VxWorks machine and it shows my card having all zeros in the BARs. But when I plug the card into a Windows PC, the BARs have values. | DriverBuilder | — |
| 73 | WD_CardRegister() failed to lock a 32MB memory range on my PCI card. The following messages appeared in the Debug Monitor log: Map_physical_mem_krnl: MmMapIoSpace failed ... Map_physical_mem_krnl: Try increasing the value of SystemPages ... |
WinDriver | — |
| 78 | Using WinDriver on Linux, I find that I need to reload the driver module (windrvr6.o) after each reboot. How can I set up dynamic loading of windrvr6.o? | WinDriver | — |
| 79 | Does WinDriver support 64-bit data transfers? | WinDriver | 5.2.0 and above |
| 80 | I have a PLX 9050 card, but I cannot access the card's memory with WinDriver's PLX 9050 diagnostics utility. I am using the P9050_Read/WriteXXX() functions.
|
WinDriver | 6.2.3 and below |
| 84 | WinDriver Upgrade: Version 6.0.x -> Version 6.2.x – 7.x | WinDriver | 6.2.X – 7.X |
| 86 | How do I detect that a USB device has been plugged in or disconnected? | WinDriver | — |
| 88 | Can I write a driver for a USB hub or a USB Host Controller card using WinDriver? | WinDriver | — |
| 89 | WinDriver driver distribution to a target Windows machine — versions 4.2.0 – 5.0.5b | WinDriver | 4.2.0 – 5.0.5b |
| 90 | Installing an INF file for PCI/USB devices on Windows Plug and Play systems — versions 4.20 – 5.05 of WinDriver. | WinDriver | 4.2.0 – 5.0.5 |
| 91 | Does WinDriver USB support isochronous streaming mode? | WinDriver | 9.0.0 and above |
| 92 | I used the DriverWizard to listen to the floppy disk interrupt (IRQ 6) successfully on my Windows 2000 machine. But when I try to listen to the mouse interrupt (IRQ 12) or to the keyboard interrupt (IRQ 1), I get the following error message: Cannot enable interrupt — might be in use by another device |
WinDriver | — |
| 93 | I get the following error when trying to install WinDriver on a Linux machine with kernel version 2.4.18-4 from the RedHat 7.3 distribution. How can I resolve this? linux_wrappers.c:405: too few arguments to function 'do_munmap_Rd007fc14' make:*** [LINUX.2.4.18-3/linux_wrappers.o] |
WinDriver | 5.2.1 and below |
| 95 | Does WinDriver support development for PCMCIA devices? | WinDriver | 6.2.2 and above |
| 97 | Can WinDriver share the Parallel/Serial port with Windows' drivers? | WinDriver | — |
| 99 | Programming the Serial Port — a brief introduction | WinDriver | — |
| 100 | The card I want to drive currently has an interrupt service routine in DOS/16-bit. How do I create a 32-bit interrupt routine for my card? | WinDriver | — |
| 103 | Can I write to disk files during an interrupt routine? | WinDriver | — |
| 107 | When performing data transfers with WD_UsbTransfer(), what is the significance of the USB_SHORT_TRANSFER and USB_FULL_TRANSFER flags (versions 5.0.4 – 5.2.2)? | WinDriver | 5.0.4 – 5.2.2 |
| 108 | Using WinDriver with Windows 2000 Service Pack 3 | WinDriver | 5.0.5 and below |
| 109 | I created a USB driver with WinDriver v5.0.5. The driver works well on
Windows 98 using windrvr.sys, but when I try to use
windrvr.vxd, WinDriver's API no longer works, and I
see the following message in the Debug Monitor: USB is not implemented on this OS |
WinDriver | 6.0.3 and below |
| 110 | When installing WinDriver v5.0.5 on my Linux machine, I get the following warning: Warning:loading /lib/modules/misc/windriver.o will taint the kernel: no license |
WinDriver | 5.0.5 and below |
| 111 | Distributing your WinDriver v5.2.x based driver to a target Windows machine | WinDriver | 5.2.X |
| 112 | WinDriver USB for Windows NT 4.0 (version 5.1.x) — Distributing Your Driver | WinDriver | 5.1.X |
| 113 | Distributing your KernelDriver based driver to a target Windows machine (versions 5.2.x – 6.1.x) | KernelDriver | 5.2.2 – 6.1.x |
| 114 | KernelDriver USB for Windows NT 4.0 (version 5.1.x) — Distributing Your Driver | KernelDriver | 5.1.X |
| 115 | How can I improve the rate of the interrupt handling when using DriverBuilder for VxWorks? | WinDriver | 5.2.2 – 5.4 |
| 117 | Distributing your WinDriver-based driver to a target Windows PC — versions 6.x – 7.x | WinDriver | 6.x – 7.x |
| 119 | I used the DriverWizard from version 6.0.0 of WinDriver to generate Visual Basic code for my USB device, but while WDU_Transfer() works correctly, the specific transfer functions — WDU_TransferBulk(), etc. — are not working as expected. | WinDriver | 6.0.0 |
| 120 | I have trouble compiling/building a Kernel PlugIn *.sys driver on a Windows 98/Me PC | WinDriver | 5.2.0 – 9.2.0 |
| 121 | What should I do in case of Windows system crash (on Windows 2000 and above)? | WinDriver | — |
| 123 | Parallel ports on Windows XP | WinDriver | — |
| 124 | When trying to intsall WinDriver on my Windows PC I got the following error: 16-bit MS-DOS Subsystem path to the program that you are trying to start or install C:\Winnt\System32\autoexec.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. |
WinDriver | 6.2.3 and below |
| 125 | Handling shared PCI interrupts in the Kernel PlugIn | WinDriver | — |
| 127 | WinDriver Upgrade: Version 6.2.x -> Version 7.x and above | WinDriver | 6.2.X – 7.X and above |
| 128 | Does WinDriver support development of drivers for the .NET framework? | WinDriver | 7.0.1 and above |
| 129 | Reserving and locking physical memory on Windows NT PCs. | WinDriver | — |
| 130 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.0.x | WinDriver | 8.0.x |
| 131 | WinDriver Upgrade: Version 7.x+ -> Version 8.x and above | WinDriver | 8.x and above |
| 132 | Distributing your WinDriver-based driver to a target Windows PC — WinDriver version 8.1.x and above. | WinDriver | 8.1.x and above |
Back to Top
Technical Documents
(WinDriver related)
WinDriver: Support Center
WinDriver: Product Page
Can't find what you need?
(WinDriver related)
Documents Navigator:
WinDriver: Support Center
WinDriver: Product Page
Can't find what you need?
