Performing an OAM Ping

To perform an OAM ping do the following:

1. Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based Management. The 'Diagnostics' screen will appear (see figure 9.87).
2. Select the type of OAM ping to perform:
   • F4 End-to-End
   • F4 Segment
   • F5 End-to-End
   • F5 Segment
3. Press the 'Go' button under the 'OAM Ping' section.
4. In a few seconds, diagnostics statistics will be displayed. If no new information is displayed, press the 'Refresh' button.