Introduction to OpenRG

OpenRG is a scalable suite of software infrastructure and technologies that Original Equipment Manufacturers (OEMs) require in order to bring Residential Gateways/Internet Access Devices (IADs) to market. OpenRG leverages a wide range of compelling broadband-based applications and services and includes an operating system, drivers and remote management capabilities. OpenRG delivers a set of highly integrated solutions, required for the home and small office, such as:

• Optimized Linux Operating System
• IP Routing and Bridging
• Asynchronous Transfer Mode (ATM) and Digital Subscriber Line (DSL) support
• Point-to-Point Protocol (PPP)
• Network/Port Address Translation (NAT/PAT)
• Quality of Service (QoS)
• Stateful Inspection Firewall
• Wireless LAN Security: WPA, 802.1x, RADIUS client
• Virtual Private Network (VPN): IPSec, PPTP, L2TP
• Universal Plug-and-Play
• File Server for Network Attached Storage (NAS) devices
• Print Server
• Web Filtering
• Carrier Grade Voice over IP (VoIP): SIP, H323, MGCP, RTP
• Management and Control: Web-based Management (WBM), Simple Network Management Protocol (SNMP), Command Line Interface (CLI), TR-069 WAN Management Protocol
• Remote Update
• System Statistics and Monitoring
• Development Environment and Tools

For the complete OpenRG specification, please go to:
http://www.jungo.com/openrg/doc/4.0/spec/jungo_doc_software_specification.pdf

OpenRG is targeted at the following platforms: DSL modems, Cable modems, CPEs, IADs, Wireless access points and routers.

You can view additional OpenRG documentation at:
http://www.jungo.com/openrg/documentation.html

The documentation includes OpenRG Product Description, OpenRG Product Specification and OpenRG Programmer's Guide.