WAN Ethernet

The WAN Ethernet connection can connect OpenRG to another network either directly or via an external modem. The Connection Wizard provides three methods to quickly configure this connection, described later in this chapter:

1. Ethernet Connection (see section 5.9).
2. Dynamic Host Configuration Protocol (see section 5.15).
3. Manual IP Address Configuration (see section 5.16).

To view and edit the WAN Ethernet connection settings, click the WAN Ethernet link in the 'Network Connections' screen (see figure 5.58). The 'WAN Ethernet Properties' screen will appear (see figure 5.82).

Figure 5.82: WAN Ethernet Properties

Clicking the "Settings" button at the bottom-right of the connection's Properties window, will open its Configuration window:

Figure 5.83: WAN Ethernet Configuration