RADIUS Server Configuration

OpenRG as a RADIUS client is described in the 'LAN Wireless' section of the OpenRG User Manual.

To configure OpenRG as a RADIUS server, perform the following:

1. Access the RADIUS Server settings either from the link in the 'Advanced' tab under the 'Services' screen, or by clicking the 'RADIUS Server' icon in the 'Advanced' screen. The 'RADIUS Server' screen appears.

   Figure 3.365: RADIUS Server

   

2. Check the 'Enabled' check box to enable this feature.

3. If you would like to set a shared secret that any RADIUS client can provide when requesting authentication, specify a 'Default Shared Secret'.

4. You can also set specific shared secrets for known clients by clicking 'Add Client'. The 'Add RADIUS Client' screen appears.

   Figure 3.366: Add RADIUS Client

   

5. Enter the client's IP address and a shared secret value, and click 'OK'. You are routed back to the 'RADIUS Server' screen, which now displays the newly added client.

   Figure 3.367: Newly Added Client