4.2 PciEventCreate

4.2 PciEventCreate
	Chapter 4. Plug-and-Play and Power Management Functions

Purpose

• Convenience function for allocating and initializing a PCI Plug-and-Play and power management event structure.

Prototype

WD_EVENT * DLLCALLCONV PciEventCreate(
    WD_PCI_ID cardId,
    WD_PCI_SLOT pciSlot,
    DWORD dwOptions,
    DWORD dwAction);

Parameters

Name	Type	Input/Output
cardId	WD_PCI_ID
• dwVendorId	DWORD	Input
• dwDeviceId	DWORD	Input
pciSlot	WD_PCI_SLOT
• dwBus	DWORD	Input
• dwSlot	DWORD	Input
• dwFunction	DWORD	Input
dwOptions	DWORD	Input
dwAction	DWORD	Input

Description

Name	Description
cardId	PCI card information structure:
• dwVendorId	PCI vendor ID to register to. If zero, register to all PCI vendor IDs.
• dwDeviceId	PCI card ID to register to. If zero, register to all PCI device IDs.
pciSlot	PCI slot information:
• dwBus	PCI bus number to register to. If zero, register to all PCI buses.
• dwSlot	PCI slot to register to. If zero, register to all slots.
• dwFunction	PCI function to register to. If zero, register to all functions.
dwOptions	Can be either zero or: • `WD_ACKNOWLEDGE` – If set, the user can perform actions on the requested event before acknowledging it. The OS waits on the event until the user calls `WD_EventSend`() If `EventRegister`() [4.4] is called, `WD_EventSend`() will be called automatically after the callback function exits.
dwAction	A bit-mask indicating which events to register to: Plug-and-Play events: • `WD_INSERT` – Device was attached and configured by the operating system's Plug-and-Play manager • `WD_REMOVE` – Device was un-configured and detached by the operating system's Plug-and-Play manager Device power state: • `WD_POWER_CHANGED_D0` – Full power • `WD_POWER_CHANGED_D1` – Low sleep • `WD_POWER_CHANGED_D2` – Medium sleep • `WD_POWER_CHANGED_D3` – Full sleep • `WD_POWER_SYSTEM_WORKING` – Fully on Systems power state: • `WD_POWER_SYSTEM_SLEEPING1` – Fully on but sleeping • `WD_POWER_SYSTEM_SLEEPING2` – CPU off, memory on, PCI on • `WD_POWER_SYSTEM_SLEEPING3` – CPU off, memory is in refresh, PCI on aux power • `WD_POWER_SYSTEM_HIBERNATE` – OS saves context before shutdown • `WD_POWER_SYSTEM_SHUTDOWN` – No context saved

Return Value

Returns a new structure for handling PCI Plug-and-Play and power management events, or NULL if the allocation failed.

Remarks

It is the responsibility of the caller to free the event structure returned by the function (using free()) when it is no longer needed.

Example

EventUnregister(event_handle);
PciEventCreate(cardId, pciSlot, WD_ACKNOWLEDGE, WD_INSERT | WD_REMOVE);


Chapter 4. Plug-and-Play and Power Management Functions		4.3 PcmciaEventCreate