3.4 Checking Your Installation
3.4.1 Windows and Linux Installation Check
-
Start DriverWizard by selecting from the Windows
menu (on Windows), or by running
<path to
WinDriver>/wizard/wdwizard.
-
Make sure that your WinDriver license is installed (see section 3.2, which explains how to install WinDriver). If
you are an evaluation version user, you do not need to install a license.
-
For PCI cards – Insert your card into the PCI bus, and verify that
DriverWizard detects it.
-
For ISA cards – Insert your card into the ISA bus, configure
DriverWizard with your card's resources and try to read/write to the card
using DriverWizard.
3.4.2 Windows CE Installation Check
-
Copy the console-mode Debug Monitor utility –
WinDriver\util\wddebug\<TARGET_CPU>\wddebug.exe – from the host Windows
machine to a directory on your target Windows CE device.
-
Run the Debug Monitor with the
status command on the target
device:
wddebug.exe status
If the windriver installation was successful, the application will display
information regarding the Debug Monitor version and current status, the
running WinDriver kernel module, and general system information.
