3.4. Checking Your Installation
3.4.1. Windows and Linux Installation Check
Start DriverWizard — <path to WinDriver>/wizard/wdwizard. On Windows you can also run DriverWizard from the
If you are a registered user, make sure that your WinDriver license is
registered (refer to Section 3.2, which
explains how to install WinDriver and register your license).
If you are an evaluation version user, you do not need to register a
For PCI cards — Insert your card into the PCI bus, and verify that
DriverWizard detects it.
For ISA cards (Windows and Linux) — Insert your card into
the ISA bus, configure DriverWizard with your card's resources and try to
read/write to the card using DriverWizard.
3.4.2. Windows CE Installation Check
Copy the console-mode Debug Monitor utility —
— from the host Windows machine to a directory on your target Windows
Run the Debug Monitor with the
status command on the target
If the WinDriver installation was successful, the application will display
information regarding the Debug Monitor version and current status, the
running WinDriver kernel module, and general system information.