3.4 Checking Your Installation

3.4.1 Windows, Linux and Solaris Installation Check

1. Start DriverWizard:
   On Windows, by choosing Programs | WinDriver | DriverWizard from the Start menu, or using the shortcut that is automatically created on your Desktop. A third option for activating the DriverWizard on Windows is by running wdwizard.exe from a command prompt under the wizard sub-directory.
   On Linux and Solaris you can access the wizard application via the file manager under the wizard sub-directory, or run the wizard application via a shell.

2. Make sure that your WinDriver license is installed (see section 3.2, which explains how to install WinDriver). If you are an evaluation version user, you do not need to install a license.

3. For PCI cards - Insert your card into the PCI bus, and verify that DriverWizard detects it.

4. For ISA cards - Insert your card into the ISA bus, configure DriverWizard with your card's resources and try to read/write to the card using DriverWizard. (Not relevant for Solaris).

3.4.2 Windows CE Installation Check

1. Start DriverWizard on your Windows host machine by choosing Programs | WinDriver | DriverWizard from the Start Menu.

2. Make sure that your WinDriver license is installed. If you are an evaluation version user, you do not need to install a license.

3. For Plug and Play devices (such as PCI, PCMCIA or CardBus) - Insert your device into the relevant bus slot, and verify that DriverWizard detects it.

4. For ISA cards - Insert your card into the ISA bus, configure DriverWizard with your card's resources and try to read/write to the card using DriverWizard.

5. Activate Visual C++ for CE.

6. Load one of the WinDriver samples, e.g., WinDriver$\backslash$samples$\backslash$speaker$\backslash$speaker.dsw.

7. Set the target platform to x86em in the Visual C++ WCE configuration toolbar.

8. Compile and run the speaker sample. The Windows host machine's speaker should be activated from within the CE emulation environment.