USB Explorer 200

USB Analyzers » USB Explorer 200
The USB Explorer 200 is a non-intrusive high speed USB 2.0 protocol analyzer allowing you to display the bus states and the packets sent, decode the descriptors, detect errors and incompatibilities in devices or drivers and measure their performance.

USB Explorer 200
Its ease of use makes the USB Explorer 200 an ideal accessory for anyone developing USB devices, hosts, embedded software or drivers. The USB Explorer enables significant reduction of development costs and product time to market.

Furthermore, using USB Explorer will improve the compatibility of peripherals, thereby reducing technical support costs. USB Explorer is an ideal solution for developing USB peripherals, embedded software or drivers. Its small size allows you to carry it with you anywhere you go.

ESB Explorer - product versions:
USB Explorer 200 Basic Edition:
  • One hardware unit
  • two USB cables
  • CD-ROM (analysis software and manuals)
  • Limited technical support
  • 2 years of limited warranty
USB Explorer 200 Standard Edition:
  • Includes USB Explorer 200 Basic Edition, plus:
  • Real-time monitor
  • Capture filtering
  • Traffic summary
  • Partial USB class decoding (descriptors only)
USB Explorer 200 Professional Edition:
Features
  • Compatible with all three USB 2.0 speeds
  • Automatic discovery of the Link Under Test speed
  • Measurement of USB bus states and low level protocols
  • Affordable price allowing to supply each developer with a unit
  • Non intrusive analysis
  • Small and robust enclosure, powered by the USB bus
  • Perfect for off-site interventions
  • Download of the analyzed data in real time with a high speed USB 2.0 connection
  • Scalable design of the hardware
  • Display of transactions and transfers layers
  • High level decoding of standard requests and descriptors
  • High level decoding of class requests and descriptors
  • Powerful display filters
  • Exportation of analyzed data to several formats (XML, text, raw, etc.)
  • Didactic display with reference to the specification
  • Software development kit available (SDK)
  • Free viewer software

Requirements
  • Pentium III 600MHz
  • 128 MB RAM
  • USB 2.0 EHCI host controller
  • Resolution 800x600 256 colors
  • Windows 2000 Service Pack 4, Windows XP Service Pack 1 or above
  • Internet Explorer 5.0 or above

Specifications
Measurements:
  • Width: 150 mm (5.91 ")
  • Length: 120 mm (4.72 ")
  • Height: 65 mm (2.56 ")
  • Weight: 750 g (1.7 lbs)
Analysis Computer Connector:
  • USB 2.0 high speed (480 Mbps)
Link Under Test Connectors:
  • USB 2.0 high speed (480 Mbps), full speed (12 Mbps) et low speed (1.5 Mbps)
  • Automatic speed discovery of Device Under Test
Trigger Connector:
  • Type: BNC
  • Input: 5V max, 1Mohms
  • Output: 3.3V, max 20mA
  • Absolute maximum ratings: -0.5V .. +6.5V, 50mA
Indicators:
  • Power: illuminated when the analyzer is powered on
  • Activity: illuminated in green when packets are detected (in red when they are recorded)
  • Trigger: illuminated in green when a trigger is detected in input (in red when detected in output)
Memory:
  • 32MB of FIFO memory
  • Analyzed data is transmitted continuously
Bus Analysis:
  • Timestamp: 16.67 ns (60 MHz) precision
  • Low-level errors: detection of bit-stuffing, CRC5 and CRC16 errors
  • Bus states: detection and measurement of Reset, Suspend, Keep Alive and High Speed Handshake states
Power Requirements:
  • Powered by the USB bus of the Analysis computer
  • No external power supply needed
Hardware Update:
  • The decoding engine and the firmware can be updated by software
Product Warranty:
  • Two years limited warranty

Purchasing Information:
To order USB Explorer 200, see our our How to Order page.

You can also download our Order Form 
and email it: sales@jungo.com, or fax it: 1-877-514-0538 (+972-74-721-2122).

Buy Now
See our How to Order page.

You can also download our Order Form  and email it: sales@jungo.com, or fax it: 1-877-514-0538 (+972-74-721-2122).

Products Range